General Mobile Discovery Stock Rom
General Mobile Discovery Software Update
1.Let's open the file you downloaded step by step, the installation will start automatically. Click Install and wait for installation to complete.
2.Step you may receive a warning in the installation phase, as in the following illustration. Select ” Install this driver software anyway ” to this warning.
3.step by pressing the ” EXIT ” button in the warning section to complete the installation.
The installation phase ends here and now it's time to start the program. If your phone is switched on, press power to turn the phone off, if necessary, remove the battery and reconnect it after 10-15 seconds. If the phone is connected to the computer via a USB cable, disconnect.
As shown in the image above, deselect the tick in the ” CheckSWVer ” option from the options section. Then press the Download button and connect the phone to the computer with the USB cable when the phone is switched off
When you connect the phone to the computer, you may receive an error message like above.The driver installation process varies between 1-3 minutes after this installation, the software will start to install automatically when you disconnect the USB cable from the phone and plug it in again.
As shown in the picture on the left side of the phone information comes and below the yellow shown in the place where you see the software installation status of your phone is 100% of this section do not disconnect until you.
Finally, when you see This arrow mark, you can disconnect the USB cable from the software operation that is finished without problems. Your phone will be turned off and on, then it will be returned to the day you first received it. You can use your phone after adjusting language, Clock, etc.
Discovery 4 GB model 4.2 JellyBean Download
Discovery 16 GB model 4.2 JellyBean Download
4.4 kitkat for discovery 16 GB model Download
Driver File For Manual Installation Download Sumber https://stock-rom-download.blogspot.com/
1.Let's open the file you downloaded step by step, the installation will start automatically. Click Install and wait for installation to complete.
2.Step you may receive a warning in the installation phase, as in the following illustration. Select ” Install this driver software anyway ” to this warning.
3.step by pressing the ” EXIT ” button in the warning section to complete the installation.
The installation phase ends here and now it's time to start the program. If your phone is switched on, press power to turn the phone off, if necessary, remove the battery and reconnect it after 10-15 seconds. If the phone is connected to the computer via a USB cable, disconnect.
As shown in the image above, deselect the tick in the ” CheckSWVer ” option from the options section. Then press the Download button and connect the phone to the computer with the USB cable when the phone is switched off
When you connect the phone to the computer, you may receive an error message like above.The driver installation process varies between 1-3 minutes after this installation, the software will start to install automatically when you disconnect the USB cable from the phone and plug it in again.
As shown in the picture on the left side of the phone information comes and below the yellow shown in the place where you see the software installation status of your phone is 100% of this section do not disconnect until you.
Finally, when you see This arrow mark, you can disconnect the USB cable from the software operation that is finished without problems. Your phone will be turned off and on, then it will be returned to the day you first received it. You can use your phone after adjusting language, Clock, etc.
Discovery 4 GB model 4.2 JellyBean Download
Discovery 16 GB model 4.2 JellyBean Download
4.4 kitkat for discovery 16 GB model Download
Driver File For Manual Installation Download Sumber https://stock-rom-download.blogspot.com/
